While the updated ref. 126710BLNR does offer more power reserve than its predecessor, Since the Rolex Explorer 216570 was launched to mark the 40th anniversary of the model, the restoration of the orange hands is a fitting tribute to the original 1970s model https://www.replicavwatches.com.
 

Jumbo Bag – UN

Our FIBCs meet the needs of many industries including aggregate, agriculture, chemical, construction, food, fertilizer, rubber, construction, aquaculture, pet food products and pharmaceuticals.

Our range of regular jumbo bags are available in coated and uncoated variety, with inner PE liner, barrier liner, etc. Fabric of these bags can be either laminated or un-laminated with or without liner (PE Film) as per the product properties and varies on weight depending on the requirements of the Safe Working Load (SWL) or Safety Factor (SF)

FIBC can be lifted by 10″ lift loops, Stevedore Straps, Lifting Sleeves, Single Point Crane Lift. Lifting options can vary and can be custom made. FIBC’s can be emptied several different ways but the most common discharge is an outlet spout that is attached to the bottom of the bag. Sometimes the discharge spout is inside a closure on the bottom of the bag such as a petal closure, pajama closure or star / x-cut closure. The closure is designed to protect the spout and to prevent the product from leaking / sifting out of the outlet before required. Discharge spouts can vary and can be custom made.

UN Bags are designed to carry hazardous products and their use is regulated by the UN Association, commonly known as the Orange Book.

There are four types of FIBCs for dangerous goods made from woven plastics:

  • 13 H 1 – Woven plastics without coating and without liner.
  • 13 H 2 – Woven plastics, coated and without liner.
  • 13 H 3 – Woven plastics, uncoated and with liner.
  • 13 H 4 – Woven plastics, coated and with liner.

UN Bags are also classified according to the Hazard level of goods they carry. Each UN Bag shall carry the UN-Symbol mentioned in the below table which shall imply the hazard level of the product.

Degree Of Danger Packing Group UN-Symbol max. Volume
High | X 1.5 m3
Medium || Y 3.0 m3
Low ||| Z 3.0 m3

All UN Bags are treated as multi-trip bags even though there is no safety factor 6:1. This term is unknown in the UN regulations. UN bags are not classified by safety factors. They are instead classified by packing groups I, II or III. The safety factor 6:1 refers to FIBCs for non-dangerous goods only.

UN Test

Several tests are applied to the UN Certified Big Bags in order to verify UN requirements such as :

Top lift test, Tear test, Stacking test, Drop test, Topple test , Righting test The above tests are conducted by the certified test houses before they issue the certificates. This report will describe in detail not only the specification of the Fibc tested but the test levels at which the Fibc passed. The certificate is unique to the type of Fibc tested and may only be used to cover the carriage of products within the limit of the UN test.

The options available are as follows:

  • SWL Range: 1102 lbs to 3306 lbs
  • Fabric: Coated / Uncoated
  • Liner: Tubular / Shaped
  • 4 Colour Printing
  • Various Top and Bottom construction options

Specifications: – Jumbo Bag:
Size: 90 x 90 x 100 cm. For construction. GSM 140 grs. SWL / Sf: 1000 kg / 5:1. With Bottom spout and top open / without bottom spout and top open.

 

Our FIBCs meet the needs of many industries including aggregate, agriculture, chemical, construction, food, fertilizer, rubber, construction, aquaculture, pet food products and pharmaceuticals.

Our range of regular jumbo bags are available in coated and uncoated variety, with inner PE liner, barrier liner, etc. Fabric of these bags can be either laminated or un-laminated with or without liner (PE Film) as per the product properties and varies on weight depending on the requirements of the Safe Working Load (SWL) or Safety Factor (SF)

FIBC can be lifted by 10″ lift loops, Stevedore Straps, Lifting Sleeves, Single Point Crane Lift. Lifting options can vary and can be custom made. FIBC’s can be emptied several different ways but the most common discharge is an outlet spout that is attached to the bottom of the bag. Sometimes the discharge spout is inside a closure on the bottom of the bag such as a petal closure, pajama closure or star / x-cut closure. The closure is designed to protect the spout and to prevent the product from leaking / sifting out of the outlet before required. Discharge spouts can vary and can be custom made.